# ipmideck

## Docs

- [CLI Reference](https://docs.ipmideck.com/cli.md): Run ipmideck from the command line — subcommands, bind flags, the 0.0.0.0:3000 default, self-signed HTTPS, demo mode, and exit codes.
- [Configuration](https://docs.ipmideck.com/configuration.md): ipmideck reads data/config.yaml and accepts IPMIDECK_-prefixed environment overrides.
- [Interactive Console](https://docs.ipmideck.com/console.md): Drive a running ipmideck server from your terminal — a pinned-header operator console with single-key actions for verbosity, sessions, servers, the dashboard URL, and the bind address.
- [Dell iDRAC](https://docs.ipmideck.com/enable-ipmi/dell-idrac.md): Enable IPMI-over-LAN on Dell iDRAC (iDRAC7 / iDRAC8 / iDRAC9) so ipmideck can connect to your PowerEdge server.
- [HPE iLO](https://docs.ipmideck.com/enable-ipmi/hpe-ilo.md): Enable IPMI/DCMI-over-LAN on HPE iLO 4 / iLO 5 so ipmideck can connect to your ProLiant server.
- [IBM IMM](https://docs.ipmideck.com/enable-ipmi/ibm-imm.md): Enable IPMI-over-LAN on the IBM Integrated Management Module II (IMM2) for System x servers. Low-confidence — verify on your hardware before use.
- [Enable IPMI on your server](https://docs.ipmideck.com/enable-ipmi/index.md): Before ipmideck can connect, IPMI-over-LAN must be enabled in your server's BMC. Per-vendor walkthroughs for Dell, Supermicro, HPE, Lenovo, and IBM.
- [Lenovo XCC](https://docs.ipmideck.com/enable-ipmi/lenovo-xcc.md): Enable IPMI-over-LAN on the Lenovo XClarity Controller (XCC / XCC2) so ipmideck can connect to your ThinkSystem server.
- [Supermicro](https://docs.ipmideck.com/enable-ipmi/supermicro.md): Enable IPMI-over-LAN on a Supermicro IPMI 2.0 BMC (X8–X12 boards). Low-confidence — verify on your hardware before use.
- [FAQ](https://docs.ipmideck.com/faq.md): Common questions about running ipmideck in a homelab.
- [Features](https://docs.ipmideck.com/features.md): Sensor monitoring, FanPilot fan control, power management, SEL, FRU, and the multi-server dashboard.
- [Getting Started](https://docs.ipmideck.com/getting-started.md): What ipmideck is, and how to get a dashboard running against your servers' BMCs in one command.
- [Installation](https://docs.ipmideck.com/installation.md): Install ipmideck with Docker or pip, and understand the --network host requirement.
- [Running ipmideck](https://docs.ipmideck.com/running.md): Start ipmideck on Windows, Linux, or Docker, find your data directory, and handle bind errors, shutdown, and restarts.
- [Security](https://docs.ipmideck.com/security.md): Every security claim here is grounded in ipmideck's own backend code — not marketing.
- [Supported Hardware](https://docs.ipmideck.com/supported-hardware.md): ipmideck speaks standard IPMI 2.0; support is tiered by how thoroughly each vendor is tested.
- [Troubleshooting](https://docs.ipmideck.com/troubleshooting.md): Connection, authentication, and IPMI errors when ipmideck talks to your BMC.